BeerSmith™ Recipes and Web Editor

Notes

All recipes are 6 gallons post-boil, 70% efficiency, Morey for color, 15% evaporation, 7.27 gallons preboil, Rager IBU. Pitch at 64 Ferment at 67, increase to 70 after the bulk of fermentation. 90 minute boil Mash @150F x.xg strike for mash, xxxF X.xg sparge, Xgal total (50% diluted with distilled) Salts (jax) Goal Antwerp, Belgium Calcium(Ca): 90.0 ppm Magnesium(Mg): 11.0 ppm Sodium(Na): 37.0 ppm Sulfate(SO4): 84.0 ppm Bicarbonate(HCO3): 76.0 ppm X grams baking soda X grams calcium chloride ........................ Belgian Blond (5 gallons/19 L, all-grain) OG = 1.065 (15.8 °P) FG = 1.012 (3.0 °P) IBU = 25 SRM = 5 ABV: = 7.0% Ingredients 9.9 lb. (4.5 kg) Best Malz Pilsen (or similar continental Pilsner) malt (2 °L) 1.2 lbs. (560 g) cane or beet Sugar (0 °L) 7 oz. (200 g) Franco-Belges aromatic malt (20 °L) 7 oz. (200 g) Great Western wheat malt (2 °L) 5.6 AAU Hallertau pellet hops (1.4 oz./39 g at 4% alpha acids) (60 min.) White Labs WLP500 (Trappist Ale) or Wyeast 1214 (Belgian Ale) yeast Step by Step Belgian Pilsner malt is the natural choice for the base malt. Feel free to substitute any high quality malt of a similar flavor and color from a different supplier. The sugar I use is the cheapest table sugar I can find at my warehouse store. Mill the grains and dough-in targeting a mash of around 1.5 quarts of water to 1 pound of grain (a liquor-to-grist ratio of about 3:1 by weight) and a temperature of 150 °F (66 °C). Hold the mash at 150 °F (66 °C) until enzymatic conversion is complete. Infuse the mash with near-boiling water while stirring or with a recirculating mash system raise the temperature to mash out at 168 °F (76 °C). Sparge slowly with 170 °F (77 °C) water, collecting wort until the pre-boil kettle volume is around 6.5 gallons (24.4 L) and the gravity is 1.050 (12.4 °P). The total wort boil time is 90 minutes, which helps reduce the S-Methyl methionine (SMM) present in the lightly kilned Pilsner malt and results in less Dimethyl Sulfide (DMS) in the finished beer. Add the bittering hops with 60 minutes remaining in the boil. Add the sugar with 15 minutes left in the boil. Chill the wort rapidly to 64 °F (18 °C), let the break material settle, rack to the fermenter, pitch the yeast and aerate thoroughly. You will need 2 packages of liquid yeast or you can make a 2.5L starter from 1 package. Pitch yeast at 64 °F (18 °C), aerate or oxygenate, and let the temperature rise slowly to 68 °F (20 °C) over the course of several days. Ferment until the yeast drops clear. With healthy yeast, fermentation should be complete in a week, but do not rush it. It is important for the beer to attenuate fully. Rack to a keg and force carbonate or rack to a bottling bucket, add priming sugar, and bottle. When finished, carbonate the beer to approximately 3 volumes.