BeerSmith™ Recipes and Web Editor

Notes

BeerCoAU - Gordon Mocha Porter All-Grain Recipe Kit https://beerco.com.au/collections/all-grain/products/gordon-mocha-porter-beerco-all-grain-recipe-kit Gordon | Mocha Porter is a rich bold Colombian Coffee and Coffee Infused Chocolate American Porter. Who doesn't love Coffee? Who doesn't love Chocolate? What better combination to keep you warm and wired up this winter. With a British Yeast to pair the esters with the rich malts and coffee and chocolate you will find Gordon is just the tonic you need to survive a cool winter or warm up anytime of the brewing year! Cheers! Prost #brewhappy always #enjoyresponsibly This is a starting point with grainbill and hops for the All-Grain Kit. Adjust equipment profile, mash profile and efficiency as per your own setup. Brewing salts and kettle finings such as Whirlfloc are optional , the recipe would benefit from a simple addition of 5g Calcium Sulphate mixed with the grains at the start of the mash. METHOD: 1. Mill the Grains and Mash In - Dough in your normal mash regime (say 3 Litres of Mash Water to 1 Kg of Grain or approx. 14 Litres of water at 73C), for a single infusion 60 minutes mash at 67 C. Vorlauf until your runnings are clear. 2. Mash Out - Raise the temperature to mash out at 76C (168F) for 10 minutes. 3. Sparge slowly - with 15 litres of 76C (169F) water, collecting wort until the pre-boil volume is around 23 L (6 US gal) 4. Boil - vigorous boil for 90 mins adding Chocolate at the start of the boil and hops and lactose according to the ingredients list above. Remove the beer from the heat when stirring in the lactose. 5. Add the bittering hop addition with 60 minutes remaining from end of boil and the following hop additions at times indicated on the ingredients list. 6. 15 minutes from end of boil: Add 2nd hop addition of Willamette, any yeast nutrient and a tab of Deltafloc or 1 tsp of Irish Moss (or other Kettle finings). 7. Add third and final hop addition at flameout 5 minutes from end of boil. 8. After the Boil, chill the wort rapidly to 18 °C (65 °F), let the break material settle, rack to the fermenter and aerate thoroughly. 9. Begin fermentation at 20 °C (68 °F) for 7 days then raise temperature to 21 °C (70 °F ) for 72 hours. 10. Add the Coffee Beans and age for 5 -7 days or to taste. 11. Crash the beer to 2 °C (35 °F) for 48 hours and then bottle or keg the beer and carbonate to approximately 2.5 volumes of CO2. Food pairing and Glass Match (Snifter or Pint glass) -Dark Chocolate Cake or Brownies -Rich Creamy Vanilla Ice Cream (Bulla)