BeerCoAU - Billy Lager

All Grain Recipe

Submitted By: BeerCoAU (Shared)
Members can download and share recipes

Brewer: Dermott Dowling
Batch Size: 5.81 galStyle: Czech Premium Pale Lager ( 3B)
Boil Size: 6.80 galStyle Guide: BJCP 2015
Color: 4.0 SRMEquipment: Generic 19L (Stainless)
Bitterness: 33.8 IBUsBoil Time: 90 min
Est OG: 1.051 (12.5° P)Mash Profile: Single Infusion, Medium Body, No Mash Out
Est FG: 1.009 SG (2.2° P)Fermentation: Ale, Two Stage
ABV: 5.5%Taste Rating: 30.0

Ingredients
Amount Name Type #
8 lbs 13.10 oz Malteurop Pilsner (1.9 SRM) Grain 1
1 lbs 10.46 oz Vienna Malt (Crisp) (4.0 SRM) Grain 2
8.82 oz Dextrin Malt (Crisp) (1.5 SRM) Grain 3
0.71 oz Saaz [3.4%] - Boil 15 min Hops 4
0.35 oz Enigma [18.2%] - Boil 15 min Hops 5
1.06 oz Saaz [3.5%] - Boil 5 min Hops 6
0.35 oz Enigma [18.2%] - Boil 5 min Hops 7
1.0 pkgs Golden Gate Lager (Giga Yeast #GY005) Yeast 8

Notes

BeerCoAU - Billy Lager AGK https://beerco.com.au/products/billy-lager-beerco-recipe-kit Lager! Lager! Lager! Sometimes all you want in life is a well balanced well brewed Lager! Not just any lager but a quality craft lager brewed cold and lagered cold to provide that clean crisp hoppy taste we all love whether the sun is shining or its raining cats and dogs outside. So without further adieu here is a Lager that you and your mates can enjoy until the cows come home. This is a starting point with grainbill and hops for the All-Grain Kit. Adjust equipment profile, mash profile and efficiency as per your own setup. Brewing salts and kettle finings such as Whirlfloc are optional , the recipe would benefit from a simple addition of 5g Calcium Chloride mixed with the grains at the start of the mash. METHOD: 1. Mash In - Do your normal mash regime (say 3 Litres of Mash Water to 1Kg of Grain), mashing at around 67C for at least 60 mins 2. Mash off - Infuse mash with near boiling water while stirring or with recirculating mash system raise temp to mash out at 76C for 10 minutes. 3. Sparge slowly - once again the brewer should do normal sparge regime in terms of water added to hit pre-boil volumes and post boil into fermenter (around 15 litres) at around 77C 4. Boil - vigorous boil for 90 mins, with first hop additions at 15 minutes and last hop additions at 5 mins from end of boil. 5. 10 minutes from end of boil: Optional here to add yeast nutrient and a tab of Deltafloc or a tsp of Irish Moss (not included in kit) 6. Cool the wort and transfer to the fermenter pitching Yeast 7. Ferment at 17 °C until the beer attenuates fully. With healthy yeast, fermentation should be complete within 1-2 weeks, but do not rush it. Rack to a keg and force carbonate or rack to a bottling bucket, add priming sugar, and bottle. Target a carbonation level of 2.5 to 3 volumes. Enigma Hops: https://beerco.com.au/products/enigma-au-hops Czech Saaz Hops: https://beerco.com.au/products/saaz-cz

This Recipe Has Not Been Rated

x
This website is using cookies. More info. That's Fine